<![CDATA[Slicer issues with a P1S]]>Hi all,

I've stood up Bambuddy and the Slicer today in my homelab as it looks like something that is really useful.

My printer is a P1S.

I've imported the profiles from a Linux version of Bambu Studio into Bambuddy. It appears that the P1S is considered the same printer as the X1C.

I imported a small STL file that I use for "calibration".

I set it for:

Bambu Lab P1S 0.4 nozzle
0.20mm Strength @BBL X1C
Bambu ABS @BBL X1C

When I go to slice, it's complaining that the filament I selected is not compatible with a smooth plate.

I've looked around and can find nowhere to set a plate type.

Any light you can shine on this conundrum would be greatly appreciated.

cheers,

chris

]]>https://forum.bambuddy.cool/topic/57/slicer-issues-with-a-p1sRSS for NodeFri, 15 May 2026 15:42:47 GMTWed, 13 May 2026 18:03:08 GMT60<![CDATA[Reply to Slicer issues with a P1S on Thu, 14 May 2026 13:19:39 GMT]]>@MartinNYHC Done!

]]>https://forum.bambuddy.cool/post/110https://forum.bambuddy.cool/post/110Thu, 14 May 2026 13:19:39 GMT<![CDATA[Reply to Slicer issues with a P1S on Thu, 14 May 2026 06:01:02 GMT]]>Need to look at it more detailed. Please open an issue on Github. Thanks.

]]>https://forum.bambuddy.cool/post/108https://forum.bambuddy.cool/post/108Thu, 14 May 2026 06:01:02 GMT<![CDATA[Reply to Slicer issues with a P1S on Wed, 13 May 2026 18:25:44 GMT]]>More info:

I'm running the Bambu Slicer in the slicer setup.

]]>https://forum.bambuddy.cool/post/104https://forum.bambuddy.cool/post/104Wed, 13 May 2026 18:25:44 GMT