Admin Panel : refused to connect

rillm

New install today. Version v0.2.4.9
Raspberry Pi 5 64-bit lite Raspbian OS
Cannot access the Admin Panel (xxx.xxx.xxx.xxx:8001), get "Refused to Connect"
Port 8000 works properly.
Ideas? Where to look?
Thanks!

rillm

P.S. I tried logging out and now can't log back in. Apparently its forgotten my Admin password. and:
'sudo bambuddy-appliance set-admin-password'
does not work. Going to do a full re-install. ugh

rillm

Reinstalled Raspbian OS 64 bit Lite
Reinstalled Babmbuddy (native Linux). Noted these warnings:

WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'RemoteDisconnected('Remote end closed connection without response')': /simple/aiohttp/

WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'RemoteDisconnected('Remote end closed connection without response')': /simple/ldap3/ldap3-2.9.1-py3-none-any.whl

WARNING: Retrying (Retry(total=4, connect=None, read=None, redirect=None, status=None)) after connection broken by 'RemoteDisconnected('Remote end closed connection without response')': /simple/markdown-it-py/markdown_it_py-4.2.0-py3-none-any.whl

Created admin user and password with first login.

Still cannot access Admin Panel : refused to connect.

h e l p

MartinNYHC

'sudo bambuddy-appliance set-admin-password'

Appliance? That has nothing to do with a Bambuddy installation.

MartinNYHC

Why dont you use the install command from the docs?

rillm

I used this command from the docs (https://wiki.bambuddy.cool/getting-started/#__tabbed_1_4)

curl -fsSL https://raw.githubusercontent.com/maziggy/bambuddy/main/install/install.sh -o install.sh && chmod +x install.sh && ./install.sh

MartinNYHC

That's correct. So it should be accessible via port 8000 (and NOT 8001).

rillm

Acccording to the Bambuddy Documentation at: https://wiki.bambuddy.cool/appliance/admin-panel/?h=admin

rillm

Ok. I think I found the reason for my confusion:

So, now my question is this:

Can I add the Admin Panel to my self-install on my Pi-5 so I can access those same features as the Appliance?
(Dashboard, Network, Updates, Diagnostics, Tailscale, etc)

Thanks!

P.S. I'll keep digging as well and if I find the answer will post it here.

rillm

Specifically, I'm most interested in :

I can't find this anywhere in the standard Bambuddy web pages at :8000

MartinNYHC

rillm

OK, so that's not an open-source option. Proprietary interface only available through purchase of the the Official Bambuddy Appliance.
Disappointingly expected.
Thanks